Dr. Vipindas K

Dr. Vipindas K,

Assistant Professor,

Department of Mechanical Engineering,

IIITDM Kurnool.

Education Qualifications:

Ph.D. in Mechanical Engineering from NIT Calicut

M.Tech. in Manufacturing Technology from NIT Calicut

B.Tech. in Mechanical Engineering from NIT Calicut

Areas of Interest/Specialization:

Conventional machining, Metal cutting, Micro machining, Micro end milling, Micro turning, Machining of composites, Surface texturing

Professional / Teaching Experience:

Publication Profiles:

Google Scholar Link: https://scholar.google.co.in/citations?user=vBcTOYQAAAAJ&hl=en

Vidwan Id: 230497

Scopus Id: 57218911861

ORCID Id: 0000-0002-6667-4513

Researcher Id: 

Important Research Publications:

International Journals:

1.       Vipindas K., Anand KN., Jose Mathew., 2018, “Effect of cutting edge radius on micro end milling: force analysis, surface roughness, and chip formation,” International Journal of Advanced Manufacturing Technology, Vol. 97 (1-4), pp. 711 – 722.

2.      Vipindas K., Jose Mathew., 2019, “Wear behavior of TiAlN coated WC tool during micro end milling of Ti-6Al-4V and analysis of surface roughness,” WEAR, Vol. 424-425, pp. 165-182.

3.      Vipindas K., Jose Mathew., 2019, “Modeling of burr thickness in micro-end milling of Ti6Al4V,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 233 (4), pp. 1087–1102.

4.      Vipindas K., Kuriachen B., Jose Mathew., 2019, “Investigations in to the effect of process parameters on surface roughness and burr formation during micro end milling of Ti-6Al-4V,” International Journal of Advanced Manufacturing Technology, Vol. 100 (5–8), pp. 1207–1222.

5.      Muhammed Sanoop A.V., Shifa K., Vipindas K., 2019 “Comparative Study of Lipid Profile in Patients with Chronic Kidney Disease on Haemodialysis / Conservative Management with Control Population,” American Journal of Biochemistry, 9(2), pp. 17-20

6.      Sahoo BN, Mohanty A, Gangopadhyay S, Vipindas K, 2020, “An insight into microstructure and machining performance of deep cryogenically treated cemented carbide inserts,” Journal of Manufacturing Processes, 58, pp. 819-831

7.      Anand Krishnan N, Vipindas K, Jose Mathew, 2020, “Micro-structure evolution-based force model and surface characteristic studies of Inconel 718 during micro-end milling,” Machining Science and Technology, DOI: 10.1080/10910344.2020.1855648, pp. 1-18

8.     Rahul Y, Vipindas K, Jose Mathew, 2020, “Methodology for prediction of sub-surface residual stress in micro end milling of Ti-6Al-4V alloy,” Journal of Manufacturing Processes,

9.      Vipindas K, Jose Mathew, 2020, “Analysis of chip morphology to understand the machining mechanism of micro end milling while machining Ti-6Al-4V,” Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2020.11.912

Book Chapters:

1.       Vipindas K, Basil Kuriachen, Jose Mathew, 2020, Advanced machining and finishing, Chapter: 13 – An insight on Ultrasonic Machining Technology, Elsevier, DOI: 10.1016/B978-0-12-817452-4.00001-4

2.      Vipindas K., Jose Mathew., 2019, “Machining of borosilicate glass using micro-end milling,” Chapter 16, Advances in Micro and Nano Manufacturing and Surface Engineering, Springer, ISBN 978-981-32-9424-0

3.      Rahul Y., Vipindas K., Kattari Muni Sekhar, Jose Mathew., 2019, “Modeling of residual stress in micro-end milling of Ti-6Al-4V alloy,” Chapter 36, Advances in Micro and Nano Manufacturing and Surface Engineering, Springer, ISBN 978-981-32-9424-0

International Conferences:

1.       Vignesh S Naidu, K Vipindas, R Manu, Jose Mathew, 2014, “Experimental Study on Varying Electromagnetic Field Assisted Die Sinking EDM,” 5th International & 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR), 2014, IIT Guwahati

2.      Vipindas K., Anchana P., Anand Krishnan N., Jose Mathew., 2015, “Characterization of Chip Geometry and Surface Roughness During Micro End Milling on Ti-6Al-4V,” Proceedings of 9th International Conference on Precision, Meso, Micro and Nano Engineering – COPEN 9, held during Dec 10-12, 2015 at IIT Bombay, India.

3.      Vipindas K., Anand Krishnan N., Jayakumar K., Jose Mathew., 2015, “Modeling and Experimental Investigation of Cutting Forces During Micro End Milling on Titanium Alloy,” Proceedings of 9th International Conference on Precision, Meso, Micro and Nano Engineering – COPEN 9, held during Dec 10-12, 2015 at IIT Bombay, India.

4.      Vipindas K., Anand Krishnan N., Anchana P., Jose Mathew., 2016, “Modeling and Experimental Investigations of Temperature Distribution During Micro End Milling of Titanium Alloy,” 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR), December 16-18, 2016 at College of Engineering., Pune, Maharashtra, India

5.      Vipindas K., Anand Krishnan N., Jose Mathew., 2016, “Effects of Tool Wear on Surface Roughness, Burr Formation and Cutting Force during Micro End Milling on Ti-6Al-4V,” 6th International & 27th All India Manufacturing Technology, Design and Research conference (AIMTDR), December 16-18, 2016 at College of Engineering., Pune, Maharashtra, India

6.      Vipindas K., Anchana P., Somashekar K.P., Jose Mathew., 2016, “Modeling and Experimental Study of Burr Formation during Micro End Milling of Ti-6Al-4V,” 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR), December 16-18, 2016 at College of Engineering., Pune, Maharashtra, India

7.      Bhanupratap Gaur., Vipindas K., Jose Mathew,2017, “Modelling of Temperature Distribution During Micro End Milling of Ti-6Al-4V Alloy,” 10th International Conference on Precision, Meso, Micro & Nano Engineering – COPEN10, Dec 07 – 09, 2017 at IIT Madras, Chennai, India

8.     Vipindas K., Bhanupratap G., Jose Mathew, 2017, “Investigation on tool wear during micro end milling of Ti6Al4V,” 10th International Conference on Precision, Meso, Micro & Nano Engineering – COPEN10, Dec 07 – 09, 2017 at IIT Madras, Chennai, India

9.      Rahul Y., Vipindas K., Jose Mathew, 2017, “Tool Wear Modeling Through Shape Mapping Method in Micro End Milling,” 10th International Conference on Precision, Meso, Micro & Nano Engineering – COPEN10, Dec 07 – 09, 2017 at IIT Madras, Chennai, India

10.  Anand Krishnan N., Vipindas K., Jiju V. Elias., Jose Mathew, 2019, “Modeling and Simulation of Cutting Temperature during Micro End milling on Inconel 718,”, 11th International Conference on Precision, Meso, Micro & Nano Engineering – COPEN11, Dec 12 – 14, 2019 at IIT Indore, Indore, India

Funded Projects:

Courses handled:

Micro and Nano Manufacturing Technology

Total Quality Management

Machine Tool Technology

Design of Machine elements

Contact:

            Email: vipindas.k (at) iiitk (dot) ac (dot) in

            Office: 08518 289104

Accolades:

1. Best poster award at 7^th International and 28^th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2018)

2. Chaired a session in 11^th International Conference on Precision, Meso, Micro & Nano Engineering (COPEN11) hosted by IIT Indore during December 12 - 14, 2019

3. Appreciation letter from Rolls-Royce UK, Combustion Chamber and Casings (CBCC) Re-validation Program Manager based on the contribution made to Inspection Re-validation activity.

4. Performance recognition award from QuEST in 2011 for outstanding performance.

      5. Three times C-SAT champion of the month award from QuEST for securing highest C-SAT score for the months September 2010, January 2013 and April 2013.